Форум АСУ в Україні

форум з автоматизації для викладачів, студентів та спеціалістів
Сьогодні: 28 березня 2024, 23:52

Часовий пояс UTC + 2 годин [ DST ]




Створити нову тему Відповісти  [ 4 повідомлень ] 
Автор Повідомлення
 Тема повідомлення: 4. Identification letters table
ПовідомленняДодано: 28 грудня 2014, 02:14 
Офлайн
Викладач

З нами з: 29 листопада 2013, 17:11
Повідомлення: 5033
4.1 Identification letters table
4.1.1 This clause provides in tabular form the alphabetic building blocks of the Instrument and Function Identification System in a concise, easily referenced manner.


Догори
 Профіль  
 
 Тема повідомлення: Re: 4. Identification letters table
ПовідомленняДодано: 05 квітня 2015, 20:01 
Офлайн

З нами з: 26 січня 2015, 12:10
Повідомлення: 3
4 Identification letters table
4.1 Identification letters table
4.1.1 This clause provides in tabular form the alphabetic building blocks of the Instrument and Function Identification System in a concise, easily referenced manner.
4.1.2 Table 4.1, together with Clause 4.2, defines and explains the meanings of the individual letters when used to identify loop and device functions.
4.1.3 The letters in Table 4.1 shall have the mandatory meanings assigned except the user shall assign:
a) Variables to the User’s Choice letters in column 1 and functions to the User’s Choice letters in columns 3, 4 and 5 when such letters are used.
b) Meanings to the blanks in columns 2, 3, 4, and 5 when additional functions or modifiers are assigned.
c) When such assignments are made they shall be documented in the User’s engineering and design standards or guidelines and on drawing legend sheets.


Догори
 Профіль  
 
 Тема повідомлення: Re: 4. Identification letters table
ПовідомленняДодано: 05 квітня 2015, 21:24 
Офлайн

З нами з: 26 січня 2015, 12:10
Повідомлення: 3
4.Таблица идентификационных букв.
4.1 Таблица буквенных обозначений.
4.1.1 Этот пункт предусматривает в табличной форме буквенные структурные блоки "Функциональной системы идентификации и приборов" в кратком, легко определяющем виде.
4.1.2 Таблица 4.1, вместе с пунктом 4.2, определяет и объясняет значение отдельных букв, когда они используются для идентификации цикла и функции устройства.
4.1.3 Буквы в таблице 4.1, должны иметь обязательные значения, которые присваиваются, кроме того пользователь должен присвоить :
a.) Переменные к выбранным буквам пользователя в колонке 1 и функции к выбранным буквам пользователя в колонках 3, 4 и 5, когда такие буквы используются.
б .) Значения для пробелов в колонках 2, 3, 4, и 5, когда дополнительные функции или модификаторы присвоены .
в.) Когда делаются такие присвоения , они должны быть зафиксированы в инженерных и конструкторских стандартах пользователя или инструкциях и нанесены на страницы условных обозначений.


Догори
 Профіль  
 
 Тема повідомлення: Re: 4. Identification letters table
ПовідомленняДодано: 05 квітня 2015, 21:35 
Офлайн

З нами з: 26 січня 2015, 12:10
Повідомлення: 3
4.2 Table 4.1 — Identification letters explanatory notes
The following notes, indicated in Table 4.1 by parentheses, are to be used as an aid in understanding the meanings of the letters when they are used in certain positions in Loop Identification Letter(s) or Functional Identifications.
(1) First Letters are a Measured/Initiating Variable and, if required, a combination of a Measured/Initiating Variable and a Variable Modifier that shall be referred to by the combined meaning.
(2) The specific meanings given for Measured/Initiating Variables [A], [B], [E], [F], [H], [I], [J], [K] [L], [P], [Q], [R], [S], [T], [U], [V], [W], [Y], and [Z] shall not be modified.
(3) Measured/Initiating Variable analysis [A] shall be used for all types of process stream composition and physical property analysis. The type of analyzer, and for stream component analyzers the components of interest, shall be defined outside the tagging bubble.
(a) “User’s Choice” Measured/Initiating Variables [C], [D], and [M] are assigned to identify conductivity, density, and moisture analysis, respectively, when it is the user’s common practice.
(4) Measured/Initiating Variable analysis [A] shall not be used to identify vibration or other types of mechanical or machinery analysis, which shall be identified by Measured/Initiating Variable vibration or mechanical analysis [V].
(5) “User’s Choice” letters [C], [D], [M], [N], and [O] that cover unlisted repetitive meanings that may have one meaning as a Measured or Initiating Variable and another as a Succeeding-Letter shall be defined only once. For example, [N] may be defined as “modulus of elasticity” as a Measured/Initiating Variable and “oscilloscope” as a Readout/Passive Function.


Догори
 Профіль  
 
Відображати повідомлення за:  Сортувати за  
Створити нову тему Відповісти  [ 4 повідомлень ] 

Часовий пояс UTC + 2 годин [ DST ]



Хто зараз онлайн

Зараз переглядають цей форум: Немає зареєстрованих користувачів і 2 гостей


Ви не можете створювати нові теми у цьому форумі
Ви не можете відповідати на теми у цьому форумі
Ви не можете редагувати ваші повідомлення у цьому форумі
Ви не можете видаляти ваші повідомлення у цьому форумі
Ви не можете додавати файли у цьому форумі

Знайти:
Вперед:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Вы можете бесплатно создать форум PHPBB2 на MyBB2.ru, Также возможно создать форум бесплатно PHPBB3 на Getbb.ru
Український переклад © 2005-2007 Українська підтримка phpBB