Форум АСУ в Україні http://asu.in.ua/ |
|
Професія: Automation Technician (Слюсар КВПіА) http://asu.in.ua/viewtopic.php?f=257&t=1113 |
Сторінка 3 з 6 |
Автор: | san [ 12 травня 2015, 18:39 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 3: Determine which device or devices of the control system could be causing the observed discrepancies in order to formulate a plan of corrective action. Knowledge of: Process control P&ID drawings Electrical fundamentals Mechanical fundamentals Basic flow, temperature, pressure, and level fundamentals Problem-solving techniques Skill in: Developing alternative solutions to a problem Identifying abnormal operating conditions Communication Interpreting P&IDs Interpreting technical documents |
Автор: | san [ 12 травня 2015, 18:40 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 4: Isolate each suspected device from the control system by following established site procedures in order to perform troubleshooting in a safe manner. Knowledge of: Process control (how systems are connected and the required components for each system) Safety practices Systems (e.g., electronics, pneumatics, mechanical, electrical) Documentation, drawings, & symbol identification Skill in: Interpreting drawings Interpreting complex technical documents Following site safety procedures Identification of safety hazards |
Автор: | san [ 12 травня 2015, 18:40 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 5: Exercise each device across calibrated range in order to determine proper operation. Knowledge of: Process control Site procedures Use of test equipment Electrical and mechanical systems Skill in: Manipulating inputs to a device Interpreting output readings Using test equipment |
Автор: | san [ 12 травня 2015, 18:41 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 6: Perform corrective action, if necessary, according to site procedures in order to resolve the problem. Knowledge of: Process control Site procedures Safety procedures Systems (e.g., electronics, pneumatics, mechanical, electrical) Mathematics Skill in: Using test equipment Implementing detailed action plans Using hand tools Verifying problem has been corrected Interpreting data and making comparisons Checking for variance/error percentage |
Автор: | san [ 12 травня 2015, 18:42 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 7: Complete all documentation as required in order to update all records. Knowledge of: Site documentation procedures Skill in: Completing required documentation |
Автор: | san [ 12 травня 2015, 18:43 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Domain IV: Start-Up Task 1: Examine all pertinent documentation in order to verify completion of all control systems that are required for start-up. Knowledge of: P&ID drawings Loop, data, and calibration sheets Operation and equipment manuals Site procedures Skill in: Interpreting calibration data sheets Interpreting loop sheets Interpreting P&IDs Interpreting, organizing, filing, and establishing order for documentation |
Автор: | san [ 12 травня 2015, 18:44 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 2: Implement applicable safety practices to be followed in order to ensure that all personnel are informed of the possible hazards during start-up. Knowledge of: Site procedures Process control Systems Safety equipment Skill in: Communicating safety practices Demonstrating safety practices |
Автор: | san [ 12 травня 2015, 18:45 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 3: Coordinate activities with all personnel involved in order to ensure that all personnel are aware of their responsibilities during start-up. Knowledge of: Systems Basic duties of other disciplines Skill in: Communicating problems identified during field walkdowns, calibrations, loops checks, etc. Establishing priorities for start-up Assigning tasks Using hand tools, measuring devices, and test equipment |
Автор: | san [ 12 травня 2015, 18:46 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 4: Implement start-up according to site procedures in order to ensure that the system is operating properly. Knowledge of: Site procedures Proper sequencing of start-up plan Task assignments Electrical and mechanical systems Process control Skill in: Following site procedures Interpreting a start-up plan Performing task assignments Calibrating, loop checking, and troubleshooting |
Автор: | san [ 12 травня 2015, 18:47 ] |
Тема повідомлення: | Re: Професія: Automation Technician |
Task 5: Assist site personnel to identify and correct problems that arise during start-up in order to commission the system. Knowledge of: Tools and test equipment Process control Instruments and loops Operator interface Skill in: Using tools and test equipment Calibrating Troubleshooting Communicating with others |
Сторінка 3 з 6 | Часовий пояс UTC + 2 годин [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |