Форум АСУ в Україні

форум з автоматизації для викладачів, студентів та спеціалістів
Сьогодні: 29 березня 2024, 16:26

Часовий пояс UTC + 2 годин [ DST ]




Створити нову тему Відповісти  [ 1 повідомлення ] 
Автор Повідомлення
 Тема повідомлення: Safe-motion choices
ПовідомленняДодано: 20 серпня 2014, 22:35 
Офлайн
Викладач

З нами з: 29 листопада 2013, 17:11
Повідомлення: 5033
Safe-motion choices
http://www.csemag.com/search/search-sin ... b44c8.html
http://e-ditionsbyfry.com/Olive/ODE/CTL ... w=document
Цитата:
The motion control industry “is going to see a flood of new standards…that promote fresh, new ways to provide machine operator safety,” says J.B. Titus, manager of business development and industry standards at Siemens Energy & Automation. That is already happening.
The old way —point-to-point wired safety systems for automated machinery installations—is less than optimal, prone to failure, and costly to maintain.
The new way —safety networks based on standard industrial networks integrated into machine control systems—is more efficient, and less prone to hazardous work-arounds.
And, it’s preventing scenarios like this:
Dr. X came in to demonstrate a large custom proton accelerator to the customer’s top brass. He wasn’t going to turn on the high-voltage beam-energy power supply, but just show that the duoplasmatron proton guns actually spat out a 150 mA proton beam with an energy of 60 KeV.
Note that 150 mA at 60 KeV means a 9,000 W beam—enough to make the stainless steel beam-tube walls glow cherry red without cooling water to protect them. “Of course,” Dr. X explained while firing up the system, “we have installed interlocks to make sure operators can’t turn on the beam unless cooling water is flowing.”
Unfortunately, in his next breath he added: “We have disabled the interlocks during final assembly and testing. In the assembly and test area, we use intelligence instead of interlocks!”
Immediately after he said that, the group was startled by the sound of six 12-in. pneumatically operated vacuum valves slamming shut, followed by the blare of a klaxon as the vacuum system sensed that the beam’s heat had melted the copper vacuum seals. The cooling water was not flowing.
Today’s automated equipment installations are far more complex than that crude semi-manual control system. Instead of the dozen or so safety sensors it had, an automated production line today can have hundreds. Simple interlock switches hardwired to controller inputs just won’t do the job anymore.
Such interlocks are quite effective during normal operations, but less effective during installation and maintenance. They are especially ineffective during troubleshooting operations—when they are needed most.

Зображення


Догори
 Профіль  
 
Відображати повідомлення за:  Сортувати за  
Створити нову тему Відповісти  [ 1 повідомлення ] 

Часовий пояс UTC + 2 годин [ DST ]



Хто зараз онлайн

Зараз переглядають цей форум: Немає зареєстрованих користувачів і 2 гостей


Ви не можете створювати нові теми у цьому форумі
Ви не можете відповідати на теми у цьому форумі
Ви не можете редагувати ваші повідомлення у цьому форумі
Ви не можете видаляти ваші повідомлення у цьому форумі
Ви не можете додавати файли у цьому форумі

Знайти:
Вперед:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Вы можете бесплатно создать форум PHPBB2 на MyBB2.ru, Также возможно создать форум бесплатно PHPBB3 на Getbb.ru
Український переклад © 2005-2007 Українська підтримка phpBB